Description: Lo-6298 foam stabilizer is a silicon-carbon bond, non-hydrolytic type, polysiloxane-Polyether copoymer. This is a versatie foam stabilizer used for the production of polyurethane rigid foam plastic, and its fied of appication is very wild, for example, it can be used in foaming system including high water later foaming, HCFC-141b, HFC and hydrocarbons. Typical data: Appearance:Light yellow to amber transparent liquid Content of active materia:100% Viscosity(25°C,mpa.s):500-1500cp Features: Because of the uniquely designed molecular structure of Lo-6298, this gives the product a superior capacity in emusifying, nucleus forming and foam stabilizing. Form very fine pore structure and high rate of obturator. Make the thermal conductivity of the foam products very ow, and improve the thermal insuation. Lo-6298 has good solubility and stability in the premixed systems containing polyether polyol, water, amine and fire retardant. Better fluidity during the foaming process. With Lo-6298, the &squo;shear line’ and &squo;sma bulgy and hollow’ phenomena can obviously be reduced or even eliminated. Uniform density and highly closed cellular structures can be obtained, the insulation and mechanical strength of the foam can be increased. How to use: Use levels of 1.0 to 2.5 parts Lo-6298 Additive per 100 parts polyol are suggested. The optimum surfactant loading should be defined for the particular foam formulation. Packaging and Storage: Available in 25-kg drums and 250-kg drums. 24 months at room temperature.